Rhino™ 405 - is a structural epoxy repair gel for rebuilding cracks/spalls. It is a highly versatile, 100% solids high build system. Its wide variety of uses on concrete substrate include structural restoration, patching, and adhesive repairs. The long working life of Rhino 405 is ideal for repairing large concrete floors and restoration of deteriorated concrete structures.

Rhino™ 1500 - is a clear, two-part sealer that can be applied over concrete and many other substrates. Rhino 1500 dries quickly, usually lacquer dry (dust free) within 1 – 2 hours. It has a long working life (4 – 6 hours) which allows larger batches to be mixed. Rhino 1500 cleans up easily with soap and water from tools and hands.

Rhino™ 1501 - is a pigmented coating that can be applied over concrete and many other substrates. Rhino 1501 coating dries quickly, usually lacquer dry within 1 – 2 hours. It also has a long working life (4 – 6 hours). Rhino 1501 offers a great “hide” in one coat at greater than 150 sq.ft./gallon. It cleans up easily with soap and water from tools and hands.

Rhino™ 2300 - is a very versatile, general purpose, multi-use epoxy with good chemical resistance. It can be applied easily over concrete substrates as a coating or slurry. Rhino 2300 coating dries quickly, usually tack free within 4 – 6 hours.

Rhino™ 9300 - is a high quality Bis-F epoxy novolac coating system which has superior chemical and abrasion resistance versus Bis-A type epoxy resins. This tightly crosslinked, self leveling epoxy system cures in the presence of moisture and humidity with excellent mechanical properties.

• Automotive	• Manufacturing Plants	• Refineries
• Avialtion	• Marine / Boating Locations	• Retail Stors / Malls
• Commercial Kitchens	• Power Plants	• Schools
• Hospitals	• Prisons	• Waste Water Plants
• Hotels	• Pulp & Paper Mills	• Veterinary Facilities
• Casions	• Railcar Facilities	• Zoos

Concrete Crack Filler – Structural Epoxy Gel that is a highly versatile, 100% solids high build system. Its wide variety of uses on concrete substrate include structural restoration, patching, and adhesive repairs.

Primer – A clear, two-part water-based epoxy primer that is easy to mix, easy to use. Coatings - Typically a one or two coat system and can be used as a stand alone product.

Self Leveling System - To be used to fill pitted concrete and can be used as a stand alone product or top coated.

Broadcast System - A coating with aggregate broadcast into it for slip resistance and/or to build film thickness and top coated.

Slurry Filled System - A coating filled with material where as the fill material falls out and fills pitted and degraded concrete. Designed to provide a refinished surface prior to topcoat.

Trowel System - A coating that is filled to a trowel consistency, hand troweled or power troweled. Typically used when there is heavier traffic with a requirement for better impact resistance and compressive strength. Also a better system for moisture vapor remediation.

Application Properties	1500	1501	2300	9300
Coverage Rate (sq. ft./gal)	208 - 260 @ 4-5 mils dft	208 - 260 @ 4-5 mils dft	80-120 @ 13-20 mils dft	100 @ 16 mils dft
% Solids by Weight	65%	65%	100%	100%
Mixed Viscosity, cps	200-400	400-600	300-600	500-800
VOC (grams/liter)	75	75	0	0
Mixing Ratio (by volume)	1:1	1:1	2:1	2:1
Working Time	2-3 hrs.	2-3 hrs.	25-35 min	8 hrs.
Walk-on Time	4-6 hrs.	4-6 hrs.	8-10 hrs.	14-16 hrs.
Cure Time (return to service)	overnight	overnight	24-36 hrs.	24-36 hrs.
Broadcast in to (chips)	yes	yes	yes	yes
Mix To A Slurry Consistency	no	no	yes	no

Product Data Sheets