1346 - White, Thixotropic Gel Resin
White, Thixotropic Gel Epoxy Resin –
White, highly thixotropic rigid epoxy resin with excellent physical properties. Very high resin viscosity for high build applications or repairs. Holds heavy tooling fabrics in place during cure. 100% solids, highly resistant to crystallization, Zero VOCs and DOT non-regulated.
Suggested Uses
Overhead work, general purpose repairs, adhesives and “coving” applications (with 3146 GEL hardener). Used where a white color is desired.
Properties of Rhino 1346 Epoxy Resin (neat)
| Viscosity: | Highly Thixotropic Paste |
| EEW: | 189 - 192 |
| Color: | White |
| Weight/Gal: | 9.7 - 8.8 lbs |
Mixing
Recommend Rhino 1346 Gel be used between 65° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1346 Gel so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.
Curing
Rhino 1346 GEL cures overnight at typical ambient temperatures (65° – 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
How Supplied
45lb Pails only (net weights). FOB San Diego, CA.
